H3C Technologies H3C S3600 Series Switches - Manual (Page 660)

2-21
To do… Use the command… Remarks
Configure
multiple
interfaces in
system view
dhcp server nbns-list ip-address&<1-8>
{ interface interface-type interface-number [ to
interface-type interface-number ] | all }
configured.
interface interface-type interface-number
dhcp server netbios-type { b-node | h-node |
m-node | p-node }
Configure the
current
interface
quit
Configure a
NetBIOS
node type for
DHCP clients
Configure
multiple
interfaces in
system view dhcp server netbios-type { b-node | h-node |
m-node | p-node } { interface interface-type
interface-number [ to interface-type
interface-number ] | all }
Required
By default, no
NetBIOS node
type is specified.
If b-node is specified for the client, you don’t need to specify any WINS server address.
Configuring BIMS Server Information for the DHCP Client
A DHCP client performs regular software update and backup using configuration files obtained from a
BIMS server. Therefore, the DHCP server needs to offer DHCP clients the BIMS server IP address, port
number, shared key from the DHCP address pool.
Follow these steps to configure BIMS server information for the DHCP client:
To do… Use the command… Remarks
Enter system view system-view —
Configure the BIMS server
information to be assigned to
the DHCP client
dhcp server bims-server ip
ip-address [ port port-number ]
sharekey key { interface
interface-type interface-number
[ to interface-type
interface-number ] | all }
Required
By default, no BIMS server
information is configured.
Configuring Option 184 Parameters for the Client with Voice Service
For details about Option 184, refer to Configuring Option 184 Parameters for the Client with Voice
Service .