beautypg.com

H3C Technologies H3C S3600 Series Switches User Manual

Page 56

background image

2-14

[Sysname-ui-aux0] authentication-mode scheme

# Set the baud rate of the console port to 19,200 bps.

[Sysname-ui-aux0] speed 19200

# Set the maximum number of lines the screen can contain to 30.

[Sysname-ui-aux0] screen-length 30

# Set the maximum number of commands the history command buffer can store to 20.

[Sysname-ui-aux0] history-command max-size 20

# Set the timeout time of the AUX user interface to 6 minutes.

[Sysname-ui-aux0] idle-timeout 6

After the above configuration, you need to modify the configuration of the terminal emulation utility

running on the PC accordingly in the dialog box shown in

Figure 2-4

to log in to the switch successfully.

This manual is related to the following products:
See also other documents in the category H3C Technologies Routers: