H3C Technologies H3C S3600 Series Switches - Manual (Page 58)

3-2
Common Configuration
Table 3-2 Common Telnet configuration
Configuration Description
Configure the command
level available to users
logging in to the VTY user
interface
Optional
By default, commands of level 0 are available to
users logging in to a VTY user interface.
Configure the protocols the
user interface supports
Optional
By default, Telnet and SSH protocol are
supported.
VTY user
interface
configuration
Set the commands to be
executed automatically after
a user log in to the user
interface successfully Optional
By default, no command is executed
automatically after a user logs into the VTY user
interface.
Make terminal services
available
Optional
By default, terminal services are available in all
user interfaces
Set the maximum number of
lines the screen can contain Optional
By default, the screen can contain up to 24 lines.
Set history command buffer
size
Optional
By default, the history command buffer can
contain up to 10 commands.
VTY terminal
configuration
Set the timeout time of a user
interface Optional
The default timeout time is 10 minutes.
Telnet Configurations for Different Authentication Modes
Table 3-3 Telnet configurations for different authentication modes
Authentication
mode
Telnet configuration Description
None
Perform common
configuration Perform common
Telnet configuration Optional
Refer to Table 3-2 .
Configure the
password
Configure the
password for local
authentication
Required
Password
Perform common
configuration Perform common
Telnet configuration Optional
Refer to Table 3-2 .