H3C Technologies H3C S3600 Series Switches - Manual (Page 1105)

1-15
You can configure a domain name suffix so that you only need to enter some fields of a domain name
and the system automatically adds the preset suffix for address resolution. The system can support at
most 10 domain name suffixes.
Follow these steps to configure dynamic DNS resolution:
To do… Use the command… Remarks
Enter system view system-view —
Enable the dynamic domain
name resolution function
dns resolve
Required
Disabled by default.
Configure an IPv6 DNS server
dns server ipv6 ipv6-address
[ interface-type
interface-number ]
Required
If the IPv6 address of the DNS
server is a link-local address,
the interface-type and
interface-number arguments
are required.
Configure the domain suffix. dns domain domain-name
Required
By default, no domain name
suffix is configured, that is, the
domain name is resolved
according to the input
information.
The dns resolve and dns domain commands are the same as those of IPv4 DNS. For details about
the commands, refer to DNS Operation in this manual.
Displaying and Maintaining IPv6
To do… Use the command… Remarks
Display DNS domain name
suffix information display dns domain
[ dynamic ]
Display IPv6 dynamic domain
name cache information. display dns ipv6
dynamic-host
Display DNS server information
display dns server
[ dynamic ]
Display the FIB entries display ipv6 fib
Display the mapping between
host name and IPv6 address
display ipv6 host
Display the brief IPv6
information of an interface
display ipv6 interface
[ interface-type
interface-number | brief ]
Available in any view