H3C Technologies H3C S3600 Series Switches - Manual (Page 816)

1-12
To do… Use the command… Remarks
Build a cluster build name
Required
name: Cluster name.
Configure a multicast MAC
address for the cluster
cluster-mac H-H-H
Required
By default, the cluster multicast
MAC address is
0180-C200-000A.
Set the interval for the
management device to send
multicast packets
cluster-mac syn-interval
time-interval
Optional
By default, the interval to send
multicast packets is one
minutes.
Set the holdtime of member
switches
holdtime seconds
Optional
By default, the holdtime is 60
seconds.
Set the interval to send
handshake packets
timer interval
Optional
By default, the interval to send
handshake packets is 10
seconds.
2) Establish a cluster in automatic mode
Follow these steps to establish a cluster in automatic mode:
To do… Use the command… Remarks
Enter system view system-view —
Enter cluster view cluster —
Configure the IP address
range for the cluster ip-pool administrator-ip-address
{ ip-mask | ip-mask-length }
Required
Start automatic cluster
establishment
auto-build [ recover ]
Required
Follow prompts to establish a
cluster.
z After a cluster is established automatically, ACL 3998 and ACL 3999 will be generated
automatically.
z After a cluster is established automatically, ACL 3998 and ACL 3999 can neither be modified nor
removed.
Configuring inside-outside interaction for a cluster
Follow these steps to configure inside-outside interaction for a cluster:
To do… Use the command… Remarks
Enter system view system-view —
Enter cluster view cluster Required