H3C Technologies H3C S3600 Series Switches - Manual (Page 941)

1-4
z For deleted files whose names are the same, only the latest deleted file is kept in the recycle bin
and can be restored.
z The files which are deleted by the delete command without the /unreserved keyword are actually
moved to the recycle bin and thus still take storage space. You can clear the recycle bin by using
the reset recycle-bin command.
z Use the update fabric command after all traffic flows are stopped.
z The dir /all command displays the files in the recycle bin in square brackets.
z If the configuration files are deleted, the switch adopts the null configuration when it starts up next
time.
Flash Memory Operations
Follow these steps to perform Flash memory operations:
To do… Use the command… Remarks
Format the Flash memory format device
Required
Available in user view
Restore space on the Flash
memory
fixdisk device
Required
Available in user view
The format operation leads to the loss of all files, including the configuration files, on the Flash memory
and is irretrievable.
Prompt Mode Configuration
You can set the prompt mode of the current file system to alert or quiet. In alert mode, the file system
will give a prompt for confirmation if you execute a command which may cause data loss, for example,
deleting or overwriting a file. In quiet mode, such prompt will not be displayed.