H3C Technologies H3C S3600 Series Switches - Manual (Page 582)

1-8
To do… Use the command… Remarks
Create a VRRP group or add a
virtual router IP address vrrp vrid virtual-router-id
virtual-ip virtual-address
Required
Configure the priority of the
VRRP group vrrp vrid virtual-router-id
priority priority
Optional
100 by default.
It is not recommended to configure features related to VRRP group on the Layer 3 interface of a
remote-probe VLAN. Otherwise, packet mirroring may be affected.
Configuring Advanced VRRP Functions
Complete these tasks to configure advanced VRRP functions
Task Remarks
Configuring the preemptive mode and preemption
delay for a switch
Optional
Configuring VRRP authentication type and
authentication key for a member switch
Optional
Configuring VRRP timer Optional
Advanced VRRP
configuration
Configuring VRRP Tracking Optional
Configuring the preemptive mode and preemption delay for a switch
To do… Use the command… Remarks
Enter system view system-view —
Enter VLAN interface view
interface Vlan-interface
vlan-id
—
Configure a virtual router IP
address vrrp vrid virtual-router-id
virtual-ip virtual-address
Required
Configure the preemptive mode
and preemption delay for the
switches in the VRRP group vrrp vrid virtual-router-id
preempt-mode [ timer delay
delay-value ]
Required
By default, preemptive mode is
set for the VRRP group and the
preemption delay is 0 seconds.
Configuring VRRP authentication type and authentication key for a member switch
To do… Use the command… Remarks
Enter system view system-view —
Enter VLAN interface view
interface Vlan-interface
vlan-id
—