H3C Technologies H3C S3600 Series Switches - Manual (Page 1069)

1-18
To do… Use the command… Remarks
Configure the probe
timeout time
timeout time
Optional
By default, a probe times out in three
seconds.
Configure the maximum
number of history
records that can be
saved
history-records number
Optional
By default, the maximum number is 50.
Configure the type of
service
tos value
Optional
By default, the service type is zero.
Start the test test-enable Required
Display test results
display hwping results
[ admin-name operation-tag ]
Required
The display command can be executed
in any view.
8) Configuring UDP test on HWPing client
Follow these steps to configure UDP test on HWPing client:
To do… Use the command… Remarks
Enter system view system-view —
Enable the HWPing
client function
hwping-agent enable
Required
By default, the HWPing client function is
disabled.
Create an HWPing
test group and enter
its view hwping
administrator-name
operation- tag
Required
By default, no test group is configured.
Configure the test
type test-type { udpprivate |
udppublic } Required
By default, the test type is ICMP.
Configure the
destination address destination-ip
ip-address
Required
This IP address and the one configured on the
HWPing server for listening service must be the
same.
By default, no destination address is configured.
Configure the
destination port destination-port
port-number
z Required in a Udpprivate test
z A Udppublic test is a UDP connection test on
port 7. Use the hwping-server udpecho
ip-address 7 command on the server to
configure the listening service port; otherwise
the test will fail. No port number needs to be
configured on the client; any destination port
number configured on the client will not take
effect.
z By default, no destination port number is
configured.
Configure the source
IP address
source-ip ip-address
Optional
By default, no source IP address is configured.
Configure the source
port source-port
port-number Optional
By default, no source port is specified.