H3C Technologies H3C S3600 Series Switches - Manual (Page 950)

1-3
FTP Configuration
Complete the following tasks to configure FTP:
Task Remarks
Creating an FTP user Required
Enabling an FTP server Required
Configuring connection idle time Optional
Specifying the source interface and source
IP address for an FTP server
Optional
Disconnecting a specified user Optional
Configuring the banner for an FTP server Optional
FTP Configuration: A
Switch Operating as an
FTP Server
Displaying FTP server information Optional
Basic configurations on an FTP client —
FTP Configuration: A
Switch Operating as an
FTP Client
Specifying the source interface and source
IP address for an FTP client
Optional
FTP Configuration: A Switch Operating as an FTP Server
Creating an FTP user
Configure the user name and password for the FTP user and set the service type to FTP. To use FTP
services, a user must provide a user name and password for being authenticated by the FTP server.
Only users that pass the authentication have access to the FTP server.
Follow these steps to create an FTP user:
To do… Use the command… Remarks
Enter system view system-view —
Add a local user and enter local
user view
local-user user-name
Required
By default, no local user is
configured.
Configure a password for the
specified user password { simple | cipher }
password
Optional
By default, no password is
configured.
Configure the service type as
FTP
service-type ftp
Required
By default, no service is
configured.