Network diagram, Configuration procedure – H3C Technologies H3C S3600 Series Switches User Manual
Page 585
1-11
Network diagram
Figure 1-3 Network diagram for single-VRRP group configuration
LSW A
Host B
LSW B
Vlan-int3
10.100.10.2/24
Vlan-int2
202.38.160.1/24
Vlan-int2
202.38.160.2/24
202.38.160.3/24
10.2.3.1/24
Host A
Internet
Virtual IP address
202.38.160.111/24
Vlan-int3
10.100.10.3/24
Configuration procedure
z
Configure Switch A.
# Configure VLAN 3.
[LSW-A] vlan 3
[LSW-A-vlan3] port Ethernet1/0/10
[LSW-A-vlan3] quit
[LSW-A] interface Vlan-interface 3
[LSW-A-Vlan-interface3] ip address 10.100.10.2 255.255.255.0
[LSW-A-Vlan-interface3] quit
# Configure VLAN 2.
[LSW-A] vlan 2
[LSW-A-vlan2] port Ethernet 1/0/6
[LSW-A-vlan2] quit
[LSW-A] interface Vlan-interface 2
[LSW-A-Vlan-interface2] ip address 202.38.160.1 255.255.255.0
[LSW-A-Vlan-interface2] quit
# Enable a VRRP group to respond to ping operations destined for its virtual router IP address.
[LSW-A] vrrp ping-enable
# Create a VRRP group.
[LSW-A] interface Vlan-interface 2
[LSW-A-Vlan-interface2] vrrp vrid 1 virtual-ip 202.38.160.111
# Set the priority for Switch A in the VRRP group.