H3C Technologies H3C S3600 Series Switches - Manual (Page 51)

2-9
To do… Use the command… Remarks
Set the baud
rate
speed speed-value
Optional
The default baud rate of an AUX port
(also the console port) is 9,600 bps.
Set the check
mode parity { even | none |
odd }
Optional
By default, the check mode of a console
port is set to none, that is, no check bit.
Set the stop
bits
stopbits { 1 | 1.5 | 2 }
Optional
The default stop bits of a console port is
1.
Configure
the
console
port
Set the data
bits
databits { 7 | 8 }
Optional
The default data bits of a console port is
8.
Configure the command
level available to users
logging in to the user
interface
user privilege level level
Optional
By default, commands of level 3 are
available to users logging in to the AUX
user interface.
Make terminal services
available to the user
interface
shell
Optional
By default, terminal services are
available in all user interfaces.
Set the maximum number
of lines the screen can
contain
screen-length
screen-length
Optional
By default, the screen can contain up to
24 lines.
You can use the screen-length 0
command to disable the function to
display information in pages.
Set history command buffer
size history-command
max-size value
Optional
The default history command buffer size
is 10. That is, a history command buffer
can store up to 10 commands by default.
Set the timeout time for the
user interface idle-timeout minutes
[ seconds ]
Optional
The default timeout time of a user
interface is 10 minutes.
With the timeout time being 10 minutes,
the connection to a user interface is
terminated if no operation is performed
in the user interface within 10 minutes.
You can use the idle-timeout 0
command to disable the timeout
function.
Configuration Example
Network requirements
Assume the switch is configured to allow users to log in through Telnet, and the user level is set to the
administrator level (level 3). Perform the following configurations for users logging in through the
console port (AUX user interface).
z Authenticate the users using passwords.