H3C Technologies H3C S3600 Series Switches - Manual (Page 497)

2-3
large number of users log in but cannot pass authentication, the switch may run out of ACL resources,
preventing other users from logging in. A timer called ACL timer is designed to solve this problem.
You can control the usage of ACL resources by setting the ACL timer. The ACL timer starts once a user
gets online. If the user has not passed authentication when the ACL timer expires, the occupied ACL
resources are released for other users to use. When a tremendous of access requests are present, you
can decrease the timeout period of the ACL timer appropriately for higher utilization of ACL resources.
Follow these steps to configure the ACL timer:
To do... Use the command... Remarks
Enter system view system-view —
Set the ACL timer
dot1x timer acl-timeout
acl-timeout-value
Required
By default, the ACL timeout
period is 30 minutes.
Displaying and Maintaining Quick EAD Deployment
To do... Use the command... Remarks
Display configuration
information about quick EAD
deployment display dot1x [ sessions |
statistics ] [ interface
interface-list ]
Available in any view
Quick EAD Deployment Configuration Example
Network requirements
A user connects to the switch directly. The switch connects to the Web server and the Internet. The user
will be redirected to the Web server to download the authentication client and upgrade software when
accessing the Internet through IE before passing authentication. After passing authentication, the user
can access the Internet.