Configuring wred, Configuration prerequisites, Configuration procedure – H3C Technologies H3C S3600 Series Switches User Manual
Page 753: Configuration example, Configuring traffic accounting
1-23
weight of queue 7: 5
Configuring WRED
Refer to section
for information about WRED.
Configuration prerequisites
z
The indexes of queues to be dropped at random, the queue length that starts the drop action, and
the drop probability have been determined.
z
The ports that need this configuration have been determined.
Configuration procedure
Follow these steps to configure WRED:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter Ethernet port view
interface interface-type
interface-number
—
Configure WRED
wred queue-index qstart
probability
Required
By default, WRED is not
configured.
Configuration example
Configure WRED for queue 2 of Ethernet 1/0/1 to drop the packets in queue 2 randomly when the
number of packets in queue 2 exceeds 64, setting the dropping probability being 20%.
Configuration procedure:
[Sysname] interface Ethernet1/0/1
[Sysname-Ethernet1/0/1] wred 2 64 20
Configuring Traffic Accounting
Refer to section
for information about traffic accounting.
Configuration prerequisites
z
The ACL rules for traffic classification have been defined. Refer to the ACL module of this manual
for information about defining ACL rules.
z
The port that needs this configuration has been determined.
Configuration procedure
Follow these steps to configure traffic accounting:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter Ethernet port view
interface interface-type
interface-number
—