H3C Technologies H3C S3600 Series Switches - Manual (Page 844)

2-3
Displaying PoE Profile Configuration
To do… Use the command… Remarks
Display the detailed information
about the PoE profiles created
on the switch display poe-profile { all-profile |
interface interface-type interface-number |
name profile-name }
Available in any
view
PoE Profile Configuration Example
PoE Profile Application Example
Network requirements
Switch A is an S3600 series Ethernet switch supporting PoE.
Ethernet 1/0/1 through Ethernet 1/0/10 of Switch A are used by users of group A, who have the following
requirements:
z
The PoE function can be enabled on all ports in use.
z
Signal mode is used to supply power.
z
The PoE priority for Ethernet 1/0/1 through Ethernet 1/0/5 is Critical, whereas the PoE priority for
Ethernet 1/0/6 through Ethernet 1/0/10 is High.
z
The maximum power for Ethernet 1/0/1 through Ethernet 1/0/5 ports is 3000 mW, whereas the
maximum power for Ethernet 1/0/6 through Ethernet 1/0/10 is 15400 mW.
Based on the above requirements, two PoE profiles are made for users of group A.
z
Apply PoE profile 1 for Ethernet 1/0/1 through Ethernet 1/0/5;
z
Apply PoE profile 2 for Ethernet 1/0/6 through Ethernet 1/0/10.