H3C Technologies H3C S3600 Series Switches - Manual (Page 797)

1-8
Specifying the Fabric Port of a Switch
You can specify the fabric port of a switch in either system view or Ethernet interface view.
Configurations in system view
Follow these steps to specify a fabric port:
To do… Use the command… Remarks
Enter system view system-view —
Specify the fabric port of a
switch fabric-port interface-type
interface-number enable Required
Not specified by default
Configurations in Ethernet interface view
Follow these steps to specify a fabric port:
To do… Use the command… Remarks
Enter system view system-view —
Enter Ethernet interface view
interface interface-type
interface-number
—
Specify the current port as the
fabric port of a switch
port link-type irf-fabric
Required
No port is specified as the
fabric port by default.