H3C Technologies H3C S3600 Series Switches - Manual (Page 530)

2-14
Figure 2-1 Network diagram for the RADIUS authorization attribute ignoring function
Host 1
Switch
RADIUS server
Host 2
IP network
NAS 1 NAS 2
Follow these steps to configure the RADIUS authorization attribute ignoring function:
To do… Use the command… Remarks
Enter system view system-view —
Create a RADIUS scheme and
enter its view radius scheme
radius-scheme-name
Required
By default, a RADIUS scheme
named "system" has already been
created in the system.
Configure the RADIUS
authorization attribute ignoring
function attribute-ignore { standard
| vendor vendor-id } type
type-value
Required
Disabled by default.
In a RADIUS scheme, you can configure:
z One standard attribute ignoring command
z One proprietary attribute ignoring command per vendor
z Up to three attribute ignoring commands in total
Configuring RADIUS Accounting Servers
Follow these steps to configure RADIUS accounting servers:
To do… Use the command… Remarks
Enter system view system-view —
Create a RADIUS
scheme and enter its
view
radius scheme
radius-scheme-name
Required
By default, a RADIUS scheme named
"system" has already been created in
the system.