H3C Technologies H3C S3600 Series Switches - Manual (Page 1087)

1-36
[Sysname] hwping-agent enable
# Create an HWPing test group, setting the administrator name to administrator and test tag to
udpprivate.
[Sysname] hwping administrator udpprivate
# Configure the test type as udpprivate.
[Sysname-hwping-administrator-udpprivate] test-type udpprivate
# Configure the IP address of the HWPing server as 10.2.2.2.
[Sysname-hwping-administrator-udpprivate] destination-ip 10.2.2.2
# Configure the destination port on the HWPing server.
[Sysname-hwping-administrator-udpprivate] destination-port 8000
# Configure to make 10 probes per test.
[Sysname-hwping-administrator-udpprivate] count 10
# Set the probe timeout time to 5 seconds.
[Sysname-hwping-administrator-udpprivate] timeout 5
# Start the test.
[Sysname-hwping-administrator-udpprivate] test-enable
# Display test results.
[Sysname-hwping-administrator-udpprivate] display hwping results administrator udpprivate
HWPing entry(admin administrator, tag udpprivate) test result:
Destination ip address:10.2.2.2
Send operation times: 10 Receive response times: 10
Min/Max/Average Round Trip Time: 10/12/10
Square-Sum of Round Trip Time: 1170
Last complete test time: 2000-4-2 8:29:45.5
Extend result:
SD Maximal delay: 0 DS Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0 Operation timeout number: 0
System busy operation number: 0 Connection fail number: 0
Operation sequence errors: 0 Drop operation number: 0
Other operation errors: 0
[Sysname-hwping-administrator-udpprivate] display hwping history administrator udpprivate
HWPing entry(admin administrator, tag udpprivate) history record:
Index Response Status LastRC Time
1 11 1 0 2000-04-02 08:29:45.5
2 12 1 0 2000-04-02 08:29:45.4
3 11 1 0 2000-04-02 08:29:45.4
4 11 1 0 2000-04-02 08:29:45.4
5 11 1 0 2000-04-02 08:29:45.4
6 11 1 0 2000-04-02 08:29:45.4
7 10 1 0 2000-04-02 08:29:45.3
8 10 1 0 2000-04-02 08:29:45.3
9 10 1 0 2000-04-02 08:29:45.3
10 11 1 0 2000-04-02 08:29:45.3