Configuring mac address table management, Configuring a mac address entry, Adding a mac address entry in system view – H3C Technologies H3C S3600 Series Switches User Manual
Page 237
1-5
Table 1-1 Characteristics of different types of MAC address entries
MAC address
entry
Configuration method
Aging time
Reserved or not at reboot
(if the configuration is
saved)
Static MAC
address entry
Manually configured
Unavailable Yes
Dynamic MAC
address entry
Manually configured or
generated by MAC
address learning
mechanism
Available No
Blackhole MAC
address entry
Manually configured
Unavailable
Yes
Configuring MAC Address Table Management
MAC Address Table Management Configuration Task List
Complete the following tasks to configure MAC address table management:
Task
Remarks
Configuring a MAC Address Entry
Required
Setting the MAC Address Aging Timer
Optional
Setting the Maximum Number of MAC Addresses a Port Can Learn
Optional
Enabling Destination MAC Address Triggered Update
Optional
Assigning MAC Addresses for Ethernet Ports
Optional
Configuring a MAC Address Entry
You can add, modify, or remove a MAC address entry, remove all MAC address entries concerning a
specific port, or remove specific type of MAC address entries (dynamic or static MAC address entries).
You can add a MAC address entry in either system view or Ethernet port view.
Adding a MAC address entry in system view
Follow these steps to add a MAC address entry in system view:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Add a MAC address
entry
mac-address { static | dynamic | blackhole }
mac-address interface interface-type
interface-number vlan vlan-id
Required