H3C Technologies H3C S3600 Series Switches - Manual (Page 88)

8-7
Follow these steps to disconnect a Web user by force:
To do… Use the command… Remarks
Disconnect a Web user
by force free web-users { all | user-id user-id |
user-name user-name } Required
Available in user view
Configuration Example
Network requirements
Only the Web users sourced from the IP address of 10.110.100.52 are permitted to access the switch.
Network diagram
Figure 8-3 Network diagram for controlling Web users using ACLs
Switch
10.110.100.46
Host A
IP network
Host B
10.110.100.52
Configuration procedure
# Define a basic ACL.
system-view
[Sysname] acl number 2030
[Sysname-acl-basic-2030] rule 1 permit source 10.110.100.52 0
[Sysname-acl-basic-2030] quit
# Apply ACL 2030 to only permit the Web users sourced from the IP address of 10.110.100.52 to access
the switch.
[Sysname] ip http acl 2030