H3C Technologies H3C S3600 Series Switches - Manual (Page 77)

5-3
Configuration Example
Network requirements
z A user logs in to the switch through Web.
z The banner page is desired when a user logs into the switch.
Network diagram
Figure 5-3 Network diagram for login banner configuration
Configuration Procedure
# Enter system view.
system-view
# Configure the banner Welcome to be displayed when a user logs into the switch through Web.
[Sysname] header login %Welcome%
Assume that a route is available between the user terminal (the PC) and the switch. After the
above-mentioned configuration, if you enter the IP address of the switch in the address bar of the
browser running on the user terminal and press , the browser will display the banner page, as
shown in Figure 5-4 .
Figure 5-4 Banner page displayed when a user logs in to the switch through Web
Click to enter user login authentication page. You will enter the main page of the
Web-based network management system if the authentication succeeds.
Enabling/Disabling the WEB Server
Follow these steps to enable/Disable the WEB Server: