H3C Technologies H3C S3600 Series Switches - Manual (Page 704)

6-3
system-view
[SwitchB] interface Vlan-interface 1
[SwitchB-Vlan-interface1] ip address dhcp-alloc
BOOTP Client Configuration Example
Network requirement
Switch B’s port belonging to VLAN1 is connected to the LAN. VLAN-interface 1 obtains an IP address
from the DHCP server by using BOOTP.
Network diagram
See Figure 2-1 .
Configuration procedure
The following describes only the configuration on Switch B serving as a client.
# Configure VLAN-interface 1 to dynamically obtain an IP address from the DHCP server.
system-view
[SwitchB] interface vlan-interface 1
[SwitchB-Vlan-interface1] ip address bootp-alloc
Displaying DHCP/BOOTP Client Configuration
To do… Use the command… Remarks
Display related information on a
DHCP client display dhcp client
[ verbose ]
Display related information on a
BOOTP client
display bootp client
[ interface Vlan-interface
vlan-id ]
Optional
Available in any view