H3C Technologies H3C S3600 Series Switches - Manual (Page 1066)

1-15
To do… Use the command… Remarks
Enable the HWPing client
function
hwping-agent enable
Required
By default, the HWPing client
function is disabled.
Create an HWPing test group
and enter its view hwping administrator-name
operation-tag
Required
By default, no test group is
configured.
Configure the test type test-type snmpquery
Required
By default, the test type is
ICMP.
Configure the destination IP
address
destination-ip ip-address
Required
By default, no destination
address is configured.
Configure the source IP
address
source-ip ip-address
Optional
By default, no source IP
address is configured.
Configure the source port source-port port-number
Optional
By default, no source port is
configured.
Configure the number of
probes per test
count times
Optional
By default, each test makes
one probe.
Configure a test description description string
Optional
By default, no description
information is configured.
Configure the maximum
number of history records that
can be saved
history-records number
Optional
By default, the maximum
number is 50.
Enable history record history-record enable
Optional
By default, history record is not
enabled.
Configure the retaining time of
history record
history keep-time keep-time
Optional
By default, the retaining time of
history record is 120 minutes.
Configure statistics interval and
the maximum number of
retained statistics information
statistics { interval interval |
max-group number }
Optional
By default, statistics interval is
120 minutes and up to two
pieces of statistics information
can be retained.
Configure the retaining time of
statistics information
statistics keep-time keep-time
Optional
By default, the retaining time of
statistics information is 120
minutes.
Configure test start time and
lifetime
test-time begin { hh:mm :ss
[ yyyy/mm/dd ] | now } lifetime
lifetime Optional
By default, no test start time
and lifetime is configured.