FUJITSU MB91460 SERIES FR60 - Manual (Page 983)

967
Chapter 50 Subclock Calibration Unit
5.Register Description
5. Register Description
This section lists the registers of the calibration unit and describes the function of each register
in detail.
■
Calibration Unit Control Register (CUCR)
■
32kHz/100kHz Timer Data Register (CUTD)
See also 4.4 CSCFG: Clock Source Configuration Register (Page No.196) for the configuration
of the Calibration Unit clock sources.
- - - STRT - - INT INTEN
⇐ Bit no.
Read/write
⇒ (R) (R) (R) (R/W) (R) (R/W) (R/W) (R/W)
Default value
⇒ (0) (0) (0) (0) (0) (0) (0) (0)
Address : 0004B0H
7 6 5 4 3 2 1 0
CUCRL
Control Register low byte
TDD15TDD14 TDD13 TDD12 TDD11TDD10 TDD9 TDD8
⇐ Bit no.
Read/write ⇒ (R/W) (R/W) (R/W) (R/W) (R/W) (R/W) (R/W) (R/W)
Default value ⇒ (1) (0) (0) (0) (0) (0) (0) (0)
32/100kHz Timer Register high byte
Address : 0004B2H
15 14 13 12 11 10 9 8
CUTDH
TDD7 TDD6 TDD5 TDD4 TDD3 TDD2 TDD1 TDD0
⇐ Bit no.
Read/write
⇒ (R/W) (R/W) (R/W) (R/W) (R/W) (R/W) (R/W) (R/W)
Default value
⇒ (0) (0) (0) (0) (0) (0) (0) (0)
Address : 0004B3H
7 6 5 4 3 2 1 0
CUTDL
32/100kHz Timer Register low byte