FUJITSU MB91460 SERIES FR60 - Manual (Page 110)

94
Chapter 3 MB91460 Series Basic Information
7.I/O Circuit Type
7. I/O Circuit Type
The table below describes the circuit types which are used on the evaluation device MB91V460 Rev.A.
Please refer to the datasheets for information about the circuit type of each pin used on the flash devices.
Type
Pull Up/
Pull Down
CMOS/
CMOS Hyst./
Automotive/
TTL
Input Stop Usage Output drive
TP00_0 Up / Dn CH / A yes - 4 mA
TP01_0 - CH / A yes A/D in / D/A out 4 mA
TP02_0 - CH / A yes I2C 3 mA
TP03_0 Up / Dn CH / A yes A/D in 4 mA
TP04_0 Up / Dn CH / A / TTL yes External Bus 4 mA
TP05_0 - CH / A yes SMC / A/D in 30 mA
TP06_0 - CH / A yes LCD COM/SEG 4 mA
TP07_0 - CH / A yes LCD V0/V1/V2 4 mA
TP08_0 - CH / A yes LCD V3 4 mA
TC00_0 - CH no MCU control -
TC01_0 Up CH no MCU control -
TC02_0 Up CH no MCU control -
TC02_1 - CH no MD0/MD1/MD2 -
TC10_0 - - no MONCLK 8 mA
TA00_0 - - - AVCC -
TA01_0 - - - AVRH/AVRL -
TA02_0 - - - A/D in -
TA03_0 - - - AVSS -
TA10_0 - - - VDD 3V -
TO00_0 - - yes X0 -
TO00_1 - - yes X1 -
TO01_0 - - yes X0A -
TO01_1 - - yes X1A -
TE00_0 - C no Tool -
TE01_0 Dn (ctrl) C no Tool -
TE02_0 Up C no Tool -
TE03_0 Up C no Tool -
TE10_0 - - no Tool 4 mA