FUJITSU MB91460 SERIES FR60 - Manual (Page 333)

317
Chapter 24 Interrupt Control
4.Registers
4.2 Interrupt Vector
Interrupt vector that corresponds to a vector number (#) with TBR register set to 0FFC00h (initial value):
• Set the address of each interruption handling routine to the corresponding vector.
• The address of a vector = TBR (table vector register) + {3FCH - 4 x vector number (#)}
• EIT used by system (#0-#14)
#00 : Address FFFBCh
#01 : Address FFFB8h
~ ~ ~
#07 : Address FFFE0h
~ ~ ~
#63 : Address FFF00h
~ ~ ~
#143 : Address FFDC0h
32 bits
Interrupt number Interrupt level (fixed) Factor
#0 0 Reset vector
#1 1 Mode vector
#2-#4 – Reserved for system
#5 5 CPU Supervisor Mode
#6 6 Memory Protection Exception
#7 7 Coprocessor absence trap
#8 8 Coprocessor error trap
#9 9 INTE instruction
#10 10 Instruction break exception
#11 11 Operand break trap
#12 12 Step trace trap
#13 13 MNI request (TOOL)
#14 14 Undefined-instruction exception
#15 15 NMI request