beautypg.com

5 gcn2: general control register 2 – FUJITSU MB91460 SERIES FR60 User Manual

Page 822

background image

806

Chapter 39 Programmable Pulse Generator

4.Registers

4.5 GCN2: General Control Register 2

Generates PPG0-PPG3, PPG4-PPG7, PPG8-PPG11 and PPG12-PPG15 internal trigger levels using
software.

• GCN20 (PPG0-PPG3): Address 0103h (Access:

Byte

)

• GCN21 (PPG4-PPG7): Address 0107h (Access:

Byte

)

• GCN22 (PPG8-PPG11): Address 010Bh (Access:

Byte

)

• GCN23 (PPG12-PPG15): Address 0323h (Access:

Byte

)

(See “

Meaning of Bit Attribute Symbols (Page No.10)

” for details of the attributes.)

• Bits 7-4: Undefined.Always write “0”. The read value is the value as written.

(See

8.

Caution (Page

No.821)

”.)

• Bit 3: EN3 trigger input

• Bit 2: EN2 trigger input

• Bit 1: EN1 trigger input

• Bit 0: EN0 trigger input

• Set the levels of internal triggers EN0, EN1, EN2, and EN3.

• If any of the EN trigger inputs (EN0, EN1, EN2, EN3) is selected with the trigger specification bits

(GCN10.TSEL0[3:0], GCN10.TSEL1[3:0], GCN10.TSEL2[3:0], and GCN10.TSEL3[3:0]) of PPG0, PPG1,
PPG2, PPG3, then the selected EN serves as a PPG trigger input bit.

• If any of the EN trigger inputs (EN0, EN1, EN2, EN3) is selected with the trigger specification bits

(GCN11.TSEL0[3:0], GCN11.TSEL1[3:0], GCN11.TSEL2[3:0], and GCN11.TSEL3[3:0]) of PPG4, PPG5,
PPG6, PPG7, then the selected EN serves as a PPG trigger input bit.

• If any of the EN trigger inputs (EN0, EN1, EN2, EN3) is selected with the trigger specification bits

(GCN12.TSEL0[3:0], GCN12.TSEL1[3:0], GCN12.TSEL2[3:0], and GCN12.TSEL3[3:0]) of PPG8, PPG9,
PPG10, PPG11, then the selected EN serves as a PPG trigger input bit.

• If any of the EN trigger inputs (EN0, EN1, EN2, EN3) is selected with the trigger specification bits

(GCN13.TSEL0[3:0], GCN13.TSEL1[3:0], GCN13.TSEL2[3:0], and GCN13.TSEL3[3:0]) of PPG12,
PPG13, PPG14, of PPG15, then the selected EN serves as a PPG trigger input bit.

• If the state selected with the trigger input edge selection bit (EGS[1:0]) is generated by software using the

trigger input bit (selected EN0, EN1, EN2, or EN3), the choice serves as an activation trigger to activate
the PPG.

7

6

5

4

3

2

1

0

bit

EN3

EN2

EN1

EN0

0

0

0

0

0

0

0

0

Initial value

R/W0

R/W0

R/W0

R/W0

R/W

R/W

R/W

R/W

Attribute

EN0, EN1, EN2, and EN3

Internal Triggers EN0, EN1, EN2, and EN3

0

Set the level to “L”.

1

Set the level to “H”.