FUJITSU MB91460 SERIES FR60 User Manual
Page 778
762
Chapter 37 Output Compare
4.Registers
• bit7: Interrupt request flag (output compare 1)
• If free-run timer count value TCDT0 matches the output compare register OCCP1, ICP1 becomes “1”.
• Interrupt request is enabled when the interrupt permission bit (ICP1) is set to “1”.
• If the interrupt request flag becoming “1” and writing of “0” to it happen at the same time, the interrupt
request flag will become “1” (flag setting is given priority).
• When using an external clock as the free-run timer operation clock, at least one external clock input is
necessary after compare match for output compare-match output and interrupt generation.
• bit6: Interrupt request flag (output compare 0)
• If free-run timer count value TCDT0 matches output compare register OCCP0, ICP0 becomes “1”.
• Interrupt request is enabled when the interrupt permission bit (ICP0) is “1”.
• If the interrupt request flag becoming “1” and writing of “0” to it happen at the same time, the interrupt
request flag will become “1” (flag setting is given priority).
• When using an external clock as the free-run timer operation clock, at least one external clock input is
necessary after compare match for output compare-match output and interrupt generation.
• bit5: Interrupt request enable (output compare 1)
• bit4: Interrupt request enable (output compare 0)
• bit3-bit2: Undefined Writing does not affect the operation. The read value is always “1”.
• bit1: Enable operation requests (output compare 1)
• A bit that enables a comparison operation between the free-run timer count value and the output
compare register (TCDT0 and OCCP1).
• Before enabling the operation, always set a value to compare register OCCP1.
• If you stop the free-run timer, output compare also stops.
ICP1
Status
Read
Write
0
Interrupt request not present
Clear flag (ICP1)
1
Interrupt request present
No effect on operation
ICP0
Status
Read
Write
0
Interrupt request not present
Clear flag (ICP0)
1
Interrupt request present
No effect on operation
ICE1
Status
0
Disable output compare 1 interrupt requests
1
Enable output compare 1 interrupt requests
ICE0
Status
0
Disable output compare 0 interrupt requests
1
Enable output compare 0 interrupt requests
CST1
Operation
0
Stop operation of output compare 1
1
Enable operation of output compare 1