Yaskawa Large Capacity Sigma II Series - Manual (Page 276)

6 Using the Digital Operator
6.2.13 Clearing Option Unit Detection Results
6-56
Using the Panel Operator
1. Press the MODE/SET Key to select the auxiliary function mode.
2. Press the Up or Down Cursor Key to select the parameter Fn014.
3. Press the DATA/SHIFT Key for a minimum of one second. The following display will
appear.
4. Press the MODE/SET Key. The display will change as shown below and the option unit
detection result will be cleared.
5. Press the DATA/SHIFT Key to return to the auxiliary function mode display.
This completes the clear of the option unit detection results.
MODE/SET DATE/
Flashing for
one second
Flashing during
initialization
End