Yaskawa Large Capacity Sigma II Series - Manual (Page 254)

6 Using the Digital Operator
6.2.5 Clearing Alarm Traceback Data
6-34
Using the Panel Operator
1. Press the MODE/SET Key to select the auxiliary function mode.
2. Press the Up or Down Cursor Key to select the parameter Fn006.
3. Press the DATA/SHIFT Key for a minimum of one second. The following display will
appear.
4. Press the MODE/SET Key to clear the alarm tracebcak data. The following display will
flash for one second, and, after the alarm traceback data is cleared, the display will
return to the one in the above step 3.
5. Press the DATA/SHIFT Key for a minimum of one second to return to the parameter
number display.
This completes the alarm traceback data clearing procedure.
MODE/SET DATE/
Flashing for
one second