Yaskawa Large Capacity Sigma II Series - Manual (Page 257)

6.2 Applied Operation
6-37
6
Using the Panel Operator
1. Press the MODE/SET Key to select the auxiliary function mode.
2. Press the Up or Down Cursor Key to select the parameter Fn011.
3. Press the DATA/SHIFT Key for a minimum of one second to display the servomotor
model and voltage code.
4. Press the MODE/SET Key to display servomotor capacity.
5. Press the MODE/SET Key to display the encoder type and resolution code.
Voltage Servomotor Model
Code Voltage Code Servomotor Model
00 100 VAC or 140 VDC 00 SGMAH
01 200 VAC or 280 VDC 01 SGMPH
02 400 VAC or 560 VDC 02 SGMSH
03
SGMGH-†A (1500 min -1 )
04
SGMGH-†B (1000 min
-1
)
05 SGMDH
06 SGMUH
0B SGMBH
Encoder Type Encoder Resolution
Code Type Code Resolution
00 Incremental encoder 13 13 bits
01 Absolute encoder 16 16 bits
17 17 bits
20 20 bits
MODE/SET DATE/
Servomotor model Voltage
Capacity: Displayed value × 10 (W)
In this example, the capacity is 100 W.
Encoder type Encoder resolution