Kontron AT8404 CLI - Manual (Page 99)

AT8404 Switching Commands
Page 2 - 63 AT8404 CLI Reference Manual
2.13.6.1 no lacp collector max delay
Use this command to configure the default port-channel collector max delay.
2.13.7 lacp actor admin
Use this command to configure the LACP actor admin parameters.
2.13.8 lacp actor admin key
Use this command to configure the administrative value of the LACP actor admin key. The valid range for <key> is
0-65535.
2.13.8.1 no lacp actor admin key
Use this command to configure the default administrative value of the key.
2.13.9 lacp actor admin state
Use this command to configure the administrative value of actor state as transmitted by the Actor in LACPDUs. The
valid value range is 0x00-0xFF.
Format no lacp collector max delay
Mode Interface Config
Default Internal Interface Number of this Physical Port
Format lacp actor admin key <key>
Mode Interface Config
Note: This command is only applicable to physical interfaces.
Format no lacp actor admin key
Mode Interface Config
Default 0x07
Format lacp actor admin state {individual|longtimeout|passive}
Mode Interface Config
Note: This command is only applicable to physical interfaces.