Kontron AT8404 CLI - Manual (Page 58)

Switching Commands AT8404
AT8404 CLI Reference Manual Page 2 - 22
2.3.5 vlan ingressfilter
This command enables ingress filtering. If ingress filtering is disabled, frames received with VLAN IDs that do not
match the VLAN membership of the receiving interface are admitted and forwarded to ports that are members of
that VLAN.
2.3.5.1 no vlan ingressfilter
This command disables ingress filtering. If ingress filtering is disabled, frames received with VLAN IDs that do not
match the VLAN membership of the receiving interface are admitted and forwarded to ports that are members of
that VLAN.
2.3.6 vlan makestatic
This command changes a dynamically created VLAN (one that is created by GVRP registration) to a static VLAN
(one that is permanently configured and defined). The ID is a valid VLAN identification number. VLAN range is 2-
4094.
2.3.7 vlan name
This command changes the name of a VLAN. The name is an alphanumeric string of up to 32 characters, and the
ID is a valid VLAN identification number. ID range is 1-4094.
2.3.7.1 no vlan name
This command sets the name of a VLAN to a blank string.
Default disabled
Format vlan ingressfilter
Mode Interface Config
Format no vlan ingressfilter
Mode Interface Config
Format vlan makestatic <2-4094>
Mode VLAN Config
Default • VLAN ID 1 - default
• other VLANS - blank string
Format vlan name <2-4094>
Mode VLAN Config
Format no vlan name <2-4094>
Mode VLAN Config