Kontron AT8404 CLI - Manual (Page 118)

Switching Commands AT8404
AT8404 CLI Reference Manual Page 2 - 82
2.16.6 ip dhcp snooping binding
Use this command to configure static DHCP Snooping binding.
2.16.6.1 no ip dhcp snooping binding
Use this command to remove the DHCP static entry from the DHCP Snooping database.
2.16.7 ip verify binding
Use this command to configure static IP source guard (IPSG) entries.
2.16.7.1 no ip verify binding
Use this command to remove the IPSG static entry from the IPSG database.
2.16.8 ip dhcp snooping limit
Use this command to control the rate at which the DHCP Snooping messages come. The default rate is 15 pps with
a range from 0 to 30 pps. The default burst level is 1 second with a range of 1 to 15 seconds.
2.16.8.1 no ip dhcp snooping limit
Use this command to set the rate at which the DHCP Snooping messages come, and the burst level, to the defaults.
Format ip dhcp snooping binding vlan
interface
Mode Global Config
Format no ip dhcp snooping binding
Mode Global Config
Format ip verify binding vlan interface
Mode Global Config
Format no ip verify binding vlan interface
Mode Global Config
Default 15 pps for rate limiting and 1 sec for burst interval
Format ip dhcp snooping limit {rate pps [burst interval seconds]}
Mode Interface Config
Format no ip dhcp snooping limit
Mode Interface Config