Kontron AT8404 CLI - Manual (Page 84)

Switching Commands AT8404
AT8404 CLI Reference Manual Page 2 - 48
Note that the login list associated with the ‘admin’ user can not be changed to prevent accidental lockout from the
switch.
2.11.20 show authentication
This command displays the ordered authentication methods for all authentication login lists.
2.11.21 show authentication users
This command displays information about the users assigned to the specified authentication login list. If the login is
assigned to non-configured users, the user “default” will appear in the user column.
2.11.22 show dot1x
This command is used to show a summary of the global dot1x configuration, summary information of the dot1x
configuration for a specified port or all ports, the detailed dot1x configuration for a specified port and the dot1x
statistics for a specified port - depending on the tokens used.
If you do not use the optional parameters or , the command displays the global dot1x
mode and the VLAN Assignment mode.
Format users login
Mode Global Config
Format show authentication
Mode Privileged EXEC
Term Definition
Authentication
Login List
The authentication login listname.
Method 1 The first method in the specified authentication login list, if any.
Method 2 The second method in the specified authentication login list, if any.
Method 3 The third method in the specified authentication login list, if any.
Format show authentication users
Mode Privileged EXEC
Term Definition
User The user assigned to the specified authentication login list.
Component The component (User or 802.1x) for which the authentication login list is assigned.
Format show dot1x [{summary { | all} | detail |
statistics ]
Mode Privileged EXEC
Term Definition
Administrative
Mode
Indicates whether authentication control on the switch is enabled or disabled.