Kontron AT8404 CLI - Manual (Page 265)

AT8404 Utility Commands
Page 4 - 51 AT8404 CLI Reference Manual
4.11.3 debug clear
This command disables all previously enabled “debug” traces.
4.11.4 debug console
This command enables the display of “debug” trace output on the login session in which it is executed. Debug
console display must be enabled in order to view any trace output. The output of debug trace commands will appear
on all login sessions for which debug console has been enabled. The configuration of this command remains in
effect for the life of the login session. The effect of this command is not persistent across resets.
4.11.4.1 no debug console
This command disables the display of “debug” trace output on the login session in which it is executed.
4.11.5 debug dot1x packet
Use this command to enable dot1x packet debug trace.
4.11.5.1 no debug dot1x packet
Use this command to disable dot1x packet debug trace.
4.11.6 debug igmpsnooping packet
This command enables tracing of IGMP Snooping packets received and transmitted by the switch.
Default disabled
Format debug clear
Mode Privileged EXEC
Default disabled
Format debug console
Mode Privileged EXEC
Format no debug console
Mode Privileged EXEC
Default disabled
Format debug dot1x
Mode Privileged EXEC
Format no debug dot1x
Mode Privileged EXEC
Default disabled
Format debug igmpsnooping packet
Mode Privileged EXEC