Kontron AT8404 CLI - Manual (Page 293)

AT8404 Management Commands
Page 5 - 17 AT8404 CLI Reference Manual
5.7.6 users snmpv3 authentication
This command specifies the authentication protocol to be used for the specified user. The valid authentication
protocols are none, md5 or sha. If you specify md5 or sha, the login password is also used as the snmpv3
authentication password and therefore must be at least eight characters in length. The is the user
name associated with the authentication protocol. You must enter the in the same case you used
when you added the user. To see the case of the , enter the show users command.
5.7.6.1 no users snmpv3 authentication
This command sets the authentication protocol to be used for the specified user to none. The is the
user name for which the specified authentication protocol is used.
5.7.7 users snmpv3 encryption
This command specifies the encryption protocol used for the specified user. The valid encryption protocols are des
or none.
If you select des, you can specify the required key on the command line. The encryption key must be 8 to 64
characters long. If you select the des protocol but do not provide a key, the user is prompted for the key. When you
use the des protocol, the login password is also used as the snmpv3 encryption password, so it must be a minimum
of eight characters. If you select none, you do not need to provide a key.
The value is the login user name associated with the specified encryption. You must enter the
in the same case you used when you added the user. To see the case of the , enter the
show users command.
5.7.7.1 no users snmpv3 encryption
This command sets the encryption protocol to none. The is the login user name for which the specified
encryption protocol will be used.
Default no authentication
Format users snmpv3 authentication {none | md5 | sha}
Mode Global Config
Format no users snmpv3 authentication
Mode Global Config
Default no encryption
Format users snmpv3 encryption {none | des[key]}
Mode Global Config
Format no users snmpv3 encryption
Mode Global Config