Kontron AT8404 CLI - Manual (Page 299)

AT8404 Management Commands
Page 5 - 23 AT8404 CLI Reference Manual
snmp-server community rw
This command restricts access to switch information. The access mode is read/write (also called private).
5.8.7 snmp-server enable traps violation
This command enables the sending of new violation traps designating when a packet with a disallowed MAC
address is received on a locked port.
5.8.7.1 no snmp-server enable traps violation
This command disables the sending of new violation traps.
5.8.8 snmp-server enable traps
This command enables the Authentication Flag.
5.8.8.1 no snmp-server enable traps
This command disables the Authentication Flag.
Format snmp-server community rw
Mode Global Config
Note: For other port security commands, see 2.7 “Protected Ports Commands” on page 2 - 34.
Default disabled
Format snmp-server enable traps violation
Mode Interface Config
Format no snmp-server enable traps violation
Mode Interface Config
Default enabled
Format snmp-server enable traps
Mode Global Config
Format no snmp-server enable traps
Mode Global Config