Kontron AT8404 CLI - Manual (Page 149)

AT8404 Switching Commands
Page 2 - 113 AT8404 CLI Reference Manual
2.22.7 show port-security dynamic
This command displays the dynamically locked MAC addresses for the port.
2.22.8 show port-security static
This command displays the statically locked MAC addresses for port.
2.22.9 show port-security violation
This command displays the source MAC address of the last packet discarded on a locked port.
2.23 LLDP (802.1AB) Commands
This section describes the command you use to configure Link Layer Discovery Protocol (LLDP), which is defined
in the IEEE 802.1AB specification. LLDP allows stations on an 802 LAN to advertise major capabilities and physical
descriptions. The advertisements allow a network management system (NMS) to access and display this
information.
2.23.1 lldp transmit
Use this command to enable the LLDP advertise capability.
Format show port-security dynamic
Mode Privileged EXEC
Term Definition
MAC Address MAC Address of dynamically locked MAC.
Format show port-security static
Mode Privileged EXEC
Term Definition
MAC Address MAC Address of statically locked MAC.
Format show port-security violation
Mode Privileged EXEC
Term Definition
MAC Address MAC Address of discarded packet on locked port.
Default disabled
Format lldp transmit
Mode Interface Config