Kontron AT8404 CLI - Manual (Page 172)

Switching Commands AT8404
AT8404 CLI Reference Manual Page 2 - 136
2.27.13 debug isdp packet
This command enables tracing of ISDP packets processed by the switch. ISDP must be enabled on both the device
and the interface in order to monitor packets for a particular interface.
2.27.13.1 no debug isdp packet
This command disables tracing of ISDP packets on the receive or the transmit sides or on both sides.
2.28 Multicast Handling Commands
2.28.1 multicast (interface)
This command configures the port based multicast handling. The command defines the handling for port specific
unregistered multicast addresses. The default handling in FASTPATH is that such packets are flooded (argument
‘default’). The user can change the behaviour that such packets are dropped (argument ‘none’). The flooding mode
is set per port. It can be applied to either individual physical ports or to a port-channel.
2.28.2 show port multicast
This command displays the port based multicast handling. The commands displays for a specified interface or all
interfaces the multicast flooding settings. The displayed fields are
• the interface
• the multicast flooding, indicating whether a packet with unregistered multicast address should be flooded or not
ISDPv1 Packets Received Total number of ISDPv1 packets received
ISDPv1 Packets Transmitted Total number of ISDPv1 packets transmtted
ISDPv2 Packets Received Total number of ISDPv2 packets received
ISDPv2 Packets Transmitted Total number of ISDPv2 packets transmitted
ISDP Bad Header Number of packets received with a bad header
ISDP Checksum Error Number of packets received with a checksum error
ISDP Transmission Failure Number of packets which failed to transmit
ISDP Invalid Format Number of invalid packets received
ISDP Table Full Number of times a neighbor entry was not added to the table due to a full
database
ISDP IP Address Table Full Displays the number of times a neighbor entry was added to the table without
an IP address.
Format debug isdp packet [{receive | transmit}]
Mode Privileged EXEC
Format no debug isdp packet [{receive | transmit}]
Mode Privileged EXEC
Format multicast flood
Mode Interface Config
Term Definition