Kontron AT8404 CLI - Manual (Page 241)

AT8404 Utility Commands
Page 4 - 27 AT8404 CLI Reference Manual
4.6.6 clear port-channel
This command clears all port-channels (LAGs).
4.6.7 clear traplog
This command clears the trap log.
4.6.8 clear vlan
This command resets VLAN configuration parameters to the factory defaults.
4.6.9 enable passwd
This command prompts you to change the Privileged EXEC password. Passwords are a maximum of 64
alphanumeric characters. The password is case sensitive.
4.6.10 enable passwd encrypted
This command allows the administrator to transfer the enable password between devices without having to know
the password. The parameter must be exactly 128 hexidecimal characters.
4.6.11 logout
This command closes the current telnet connection or resets the current serial connection.
Format clear port-channel
Mode Privileged EXEC
Format clear traplog
Mode Privileged EXEC
Format clear vlan
Mode Privileged EXEC
Format enable passwd
Mode Privileged EXEC
Format enable passwd encrypted
Mode Privileged EXEC
Note: Save configuration changes before logging out.
Format logout
Modes • Privileged EXEC
• User EXEC