Kontron AT8404 CLI - Manual (Page 106)

Switching Commands AT8404
AT8404 CLI Reference Manual Page 2 - 70
2.13.25.1 no port-channel static
This command sets the static mode on a particular port-channel (LAG) interface to the default value. This command
will be executed only for interfaces of type port-channel (LAG).
2.13.26 port lacpmode
This command enables Link Aggregation Control Protocol (LACP) on a port.
2.13.26.1 no port lacpmode
This command disables Link Aggregation Control Protocol (LACP) on a port.
2.13.27 port lacpmode all
This command enables Link Aggregation Control Protocol (LACP) on all ports.
2.13.27.1 no port lacpmode all
This command disables Link Aggregation Control Protocol (LACP) on all ports.
2.13.28 port lacptimeout (Interface Config)
This command sets the timeout on a physical interface of a particular device type (actor or partner) to either long
or short timeout.
Format port-channel static
Mode Interface Config
Format no port-channel static
Mode Interface Config
Default enabled
Format port lacpmode
Mode Interface Config
Format no port lacpmode
Mode Interface Config
Format port lacpmode all
Mode Global Config
Format no port lacpmode all
Mode Global Config
Default long
Format port lacptimeout {actor | partner} {long | short}
Mode Interface Config