6 show interface ethernet, Show interface ethernet - 7, At8404 utility commands – Kontron AT8404 CLI User Manual
Page 221

AT8404
Utility Commands
Page 4 - 7
AT8404 CLI Reference Manual
The display parameters, when the argument is
The display parameters, when the argument is “switchport” are as follows:
4.4.6
show interface ethernet
This command displays detailed statistics for a specific interface or for all CPU traffic based upon the argument.
Parameters
Definition
Packets Received
Without Error
The total number of packets (including broadcast packets and multicast packets) received by
the processor.
Packets Received
With Error
The number of inbound packets that contained errors preventing them from being deliverable
to a higher-layer protocol.
Broadcast Packets
Received
The total number of packets received that were directed to the broadcast address. Note that
this does not include multicast packets.
Packets
Transmitted
Without Error
The total number of packets transmitted out of the interface.
Transmit Packets
Errors
The number of outbound packets that could not be transmitted because of errors.
Collisions Frames The best estimate of the total number of collisions on this Ethernet segment.
Time Since
Counters Last
Cleared
The elapsed time, in days, hours, minutes, and seconds since the statistics for this port were
last cleared.
Term
Definition
Broadcast Packets
Received
The total number of packets received that were directed to the broadcast address. Note that
this does not include multicast packets.
Packets Received
With Error
The number of inbound packets that contained errors preventing them from being deliverable
to a higher-layer protocol.
Packets
Transmitted
Without Error
The total number of packets transmitted out of the interface.
Broadcast Packets
Transmitted
The total number of packets that higher-level protocols requested to be transmitted to the
Broadcast address, including those that were discarded or not sent.
Transmit Packet
Errors
The number of outbound packets that could not be transmitted because of errors.
Address Entries
Currently In Use
The total number of Forwarding Database Address Table entries now active on the switch,
including learned and static entries.
VLAN Entries
Currently In Use
The number of VLAN entries presently occupying the VLAN table.
Time Since
Counters Last
Cleared
The elapsed time, in days, hours, minutes, and seconds since the statistics for this switch
were last cleared.
Format
show interface ethernet
{
Mode
Privileged EXEC