Kontron AT8404 CLI - Manual (Page 121)

AT8404 Switching Commands
Page 2 - 85 AT8404 CLI Reference Manual
Example: The following shows example CLI display output for the command.
(switch) #show ip dhcp snooping binding
Total number of bindings: 2
MAC Address IP Address VLAN Interface Type Lease (Secs)
------------------ ------------ ---- --------- ---- -------------
00:02:B3:06:60:80 210.1.1.3 10 0/1
86400
00:0F:FE:00:13:04 210.1.1.4 10 0/1 86400
2.16.14 show ip dhcp snooping database
Use this command to display the DHCP Snooping configuration related to the database persistency.
Example: The following shows example CLI display output for the command.
(switch) #show ip dhcp snooping database
agent url: /10.131.13.79:/sai1.txt
write-delay: 5000
2.16.15 show ip dhcp snooping statistics
Use this command to list statistics for DHCP Snooping security violations on untrusted ports.
Type Binding type; statically configured from the CLI or dynamically learned.
Lease (sec) The remaining lease time for the entry.
Format show ip dhcp snooping database
Mode • Privileged EXEC
• User EXEC
Term Definition
Agent URL Bindings database agent URL.
Write Delay The maximum write time to wrte the database into local or remote.
Format show ip dhcp snooping statistics
Mode • Privileged EXEC
• User EXEC
Term Definition
Interface The IP address of the interface in slot/port format.
MAC Verify
Failures
Represents the number of DHCP messages that were filtered on an untrusted interface
because of source MAC address and client HW address mismatch.
Client Ifc
Mismatch
Represents the number of DHCP release and Deny messages received on the different ports
than learned previously.
Term Definition