Kontron AT8404 CLI - Manual (Page 298)

Management Commands AT8404
AT8404 CLI Reference Manual Page 5 - 22
5.8.4 snmp-server community ipmask
This command sets a client IP mask for an SNMP community. The address is the associated community SNMP
packet sending address and is used along with the client IP address value to denote a range of IP addresses from
which SNMP clients may use that community to access the device. A value of 255.255.255.255 will allow access
from only one station, and will use that machine's IP address for the client IP address. A value of 0.0.0.0 will allow
access from any IP address. The name is the applicable community name.
5.8.4.1 no snmp-server community ipmask
This command sets a client IP mask for an SNMP community to 0.0.0.0. The name is the applicable community
name. The community name may be up to 16 alphanumeric characters.
5.8.5 snmp-server community mode
This command activates an SNMP community. If a community is enabled, an SNMP manager associated with this
community manages the switch according to its access right. If the community is disabled, no SNMP requests using
this community are accepted. In this case the SNMP manager associated with this community cannot manage the
switch until the Status is changed back to Enable.
5.8.5.1 no snmp-server community mode
This command deactivates an SNMP community. If the community is disabled, no SNMP requests using this
community are accepted. In this case the SNMP manager associated with this community cannot manage the switch
until the Status is changed back to Enable.
5.8.6 snmp-server community ro
This command restricts access to switch information. The access mode is read-only (also called public).
Default 0.0.0.0
Format snmp-server community ipmask
Mode Global Config
Format no snmp-server community ipmask
Mode Global Config
Default • private and public communities - enabled
• other four - disabled
Format snmp-server community mode
Mode Global Config
Format no snmp-server community mode
Mode Global Config
Format snmp-server community ro
Mode Global Config