Kontron AT8404 CLI - Manual (Page 290)

Management Commands AT8404
AT8404 CLI Reference Manual Page 5 - 14
5.5.3 crypto key generate dsa
Use this command to generate a DSA key pair for SSH. The new key files will overwrite any existing generated or
downloaded DSA key files.
5.5.3.1 no crypto key generate dsa
Use this command to delete the DSA key files from the device.
5.6 Access Commands
Use the commands in this section to close remote connections or to view information about connections to the
system.
5.6.1 disconnect
Use the disconnect command to close Telnet or SSH sessions. Use all to close all active sessions, or use
to specify the session ID to close. To view the possible values for , use the show
loginsession command.
5.6.2 show loginsession
This command displays current Telnet and serial port connections to the switch.
Format crypto key generate dsa
Mode Global Config
Format no crypto key generate dsa
Mode Global Config
Format disconnect { | all}
Mode Privileged EXEC
Format show loginsession
Mode Privileged EXEC
Term Definition
ID Login Session ID.
User Name The name the user entered to log on to the system.
Connection From IP address of the remote client machine or EIA-232 for the serial port connection.
Idle Time
Time this session has been idle.
Session Time Total time this session has been connected.
Session Type Shows the type of session, which can be telnet, serial, or SSH.