Kontron AT8404 CLI - Manual (Page 193)

AT8404 Quality of Service (QoS) Commands
Page 3 - 19 AT8404 CLI Reference Manual
3.4.6.1 no class
This command deletes the instance of a particular class and its defined treatment from the specified policy.
is the names of an existing DiffServ class.
3.4.7 mark cos
This command marks all packets for the associated traffic stream with the specified class of service value in the
priority field of the 802.1p header (the only tag in a single tagged packet or the first or outer 802.1Q tag of a double
VLAN tagged packet). If the packet does not already contain this header, one is inserted. The CoS value is an
integer from 0 to 7.mark ip-dscp
This command marks all packets for the associated traffic stream with the specified IP DSCP value.
The value is specified as either an integer from 0 to 63, or symbolically through one of the following
keywords: af11, af12, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6,
cs7, ef.
3.4.8 mark ip-precedence
This command marks all packets for the associated traffic stream with the specified IP Precedence value. The IP
Precedence value is an integer from 0 to 7.
Note: This command removes the reference to the class definition for the specified policy.
Format no class
Mode Policy-Map Config
Default 1
Format mark-cos <0-7>
Mode Policy-Class-Map Config
Incompatibilities Drop, Mark IP DSCP, IP Precedence, Police
Format mark ip-dscp
Mode Policy-Class-Map Config
Incompatibilities Drop, Mark CoS, Mark IP Precedence, Police
Note: This command may not be used on IPv6 classes. IPv6 does not have a precedence field.
Format mark ip-precedence <0-7>
Mode Policy-Class-Map Config
Incompatibilities Drop, Mark CoS, Mark IP Precedence, Police
Policy Type In