Kontron AT8404 CLI - Manual (Page 161)

AT8404 Switching Commands
Page 2 - 125 AT8404 CLI Reference Manual
Subtype: elin
Info: xxx xxx xxx
Extended POE
Device Type: pseDevice
Extended POE PSE
Available: 0.3 Watts
Source: primary
Priority: critical
Extended POE PD
Required: 0.2 Watts
Source: local
Priority: low
2.24.11 show lldp med remote-device
Use this command to display the summary information about remote devices that transmit current LLDP MED data
to the system. You can show information about LLDP MED remote data received on all valid LLDP interfaces or on
a specific physical interface.
Example: The following shows example CLI display output for the command.
(Broadcom FASTPATH Routing) #show lldp med remote-device all
LLDP MED Remote Device Summary
Local
Interface Remote ID Device Class
--------- --------- ------------
0/8 1
Class I
0/9 2 Not Defined
0/10 3 Class II
0/11 4 Class III
0/12 5 Network Con
2.24.12 show lldp med remote-device detail
Use this command to display detailed information about remote devices that transmit current LLDP MED data to an
interface on the system.
Example: The following shows example CLI display output for the command.
(Broadcom FASTPATH Routing) #show lldp med remote-device detail 1/0/8
LLDP MED Remote Device Detail
Format show lldp med remote-device { | all}
Mode Privileged EXEC
Format show lldp med remote-device detail
Mode Privileged EXEC