Kontron AT8404 CLI - Manual (Page 295)

AT8404 Management Commands
Page 5 - 19 AT8404 CLI Reference Manual
5.7.11 passwords min-length
Use this command to enforce a minimum password length for local users. The value also applies to the enable
password. The valid range is 8-64.
5.7.11.1 no passwords min-length
Use this command to set the minimum password length to the default value.
5.7.12 passwords history
Use this command to set the number of previous passwords that shall be stored for each user account. When a local
user changes his or her password, the user will not be able to reuse any password stored in password history. This
ensures that users don’t reuse their passwords often. The valid range is 0-10.
5.7.12.1 no passwords history
Use this command to set the password history to the default value.
5.7.13 passwords aging
Use this command to implement aging on passwords for local users. When a user’s password expires, the user will
be prompted to change it before logging in again. The valid range is 1-365. The default is 0, or no aging.
5.7.13.1 no passwords aging
Use this command to set the password aging to the default value.
Default 8
Format passwords min-length <8-64>
Mode Global Config
Format no passwords min-length
Mode Global Config
Default 0
Format passwords history <0-10>
Mode Global Config
Format no passwords history
Mode Global Config
Default 0
Format passwords aging <1-365>
Mode Global Config
Format no passwords aging
Mode Global Config