Kontron AT8404 CLI - Manual (Page 159)

AT8404 Switching Commands
Page 2 - 123 AT8404 CLI Reference Manual
2.24.7.1 no lldp med transmit-tlv
Use this command to remove a TLV.
2.24.8 show lldp med
Use this command to display a summary of the current LLDP MED configuration.
Example: The following shows example CLI display output for the command.
(Broadcom FASTPATH Routing) #show lldp med
LLDP MED Global Configuration
Fast Start Repeat Count: 3
Device Class: Network Connectivity
(Broadcom FASTPATH Routing) #
2.24.9 show lldp med interface
Use this command to display a summary of the current LLDP MED configuration for a specific interface.
port> indicates a specific physical interface. all indicates all valid LLDP interfaces.
Example: The following shows example CLI display output for the command.
(Broadcom FASTPATH Routing) #show lldp med interface all
Interface Link configMED operMED ConfigNotify TLVsTx
--------- ------ --------- -------- ------------ -----------
0/1 Down Disabled Disabled Disabled 0,1
0/2 Up Disabled Disabled Disabled 0,1
0/3 Down Disabled Disabled Disabled 0,1
0/4 Down Disabled Disabled Disabled 0,1
0/5 Down Disabled Disabled Disabled 0,1
0/6 Down Disabled Disabled Disabled 0,1
0/7 Down Disabled Disabled Disabled 0,1
0/8 Down Disabled Disabled Disabled 0,1
0/9 Down Disabled Disabled Disabled 0,1
0/10 Down Disabled Disabled Disabled 0,1
0/11 Down Disabled Disabled Disabled 0,1
0/12 Down Disabled Disabled Disabled 0,1
0/13 Down Disabled Disabled Disabled 0,1
0/14 Down Disabled Disabled Disabled 0,1
TLV Codes: 0- Capabilities, 1- Network Policy
Format no lldp med transmit-tlv [capabilities] [network-policy] [ex-pse] [ex-
pd] [location] [inventory]
Mode Global Config
Format show lldp med
Mode Privileged Exec
Format show lldp med interface {slot/port | all}
Mode Privileged Exec