Kontron AT8404 CLI - Manual (Page 98)

Switching Commands AT8404
AT8404 CLI Reference Manual Page 2 - 62
2.13.3 deleteport (Interface Config)
This command deletes the port from the port-channel (LAG). The interface is a logical slot/port number of a
configured port-channel.
2.13.4 deleteport (Global Config)
This command deletes all configured ports from the port-channel (LAG). The interface is a logical slot/port number
of a configured port-channel. To clear the port channels, see 4.6.6 “clear port-channel” on page 4 - 27
.
2.13.5 lacp admin key
Use this command to configure the administrative value of the key for the port-channel. The value range of <key>
is 0 to 65535.
2.13.5.1 no lacp admin key
Use this command to configure the default administrative value of the key for the port-channel.
2.13.6 lacp collector max-delay
Use this command to configure the port-channel collector max delay. The valid range of <delay> is 0-65535.
Format deleteport
Mode Interface Config
Format deleteport { | all}
Mode Global Config
Default 0x8000
Format lacp admin key <key>
Mode Interface Config
Note: This command is only applicable to port-channel interfaces.
Format no lacp admin key
Mode Interface Config
Default 0x8000
Format lacp collector max delay <delay>
Mode Interface Config
Note: This command is only applicable to port-channel interfaces.